How Much Does A Small Drywall Hole Repair Cost in Toronto
Most small drywall hole repairs start at $249 plus HST for drywall repair only, with a smooth paint-ready finish. Paint and final finishing take a second visit.
Service area: Scarborough, The Beaches, East York, North York, Toronto, and the GTA
Google rating: 4.8 stars, 26 reviews
Workmanship warranty: 1 yr
For Small Drywall Hole Repair Cost Toronto call FIXRR Handyman: 437 264 6010
Quick answer on price
If you want a stable repair and a smooth paint-ready finish, expect a minimum service call price.
At FIXRR Handyman, our typical starting price for most small drywall or sheetrock hole repairs completed in one visit is $249 plus HST for drywall repair only, with no final paint.
What counts as a small drywall hole repair
In this post, a small hole means a hole up to fist size, or a cutout.
Common examples we see across Toronto and the GTA:
- Doorknob impact holes
- Curtain rod pullouts
- Bathroom fixture pullouts
- Trade access cutouts after plumbing or electrical work
- Small patch areas around loose anchors and fasteners
What your $249 minimum service call covers
You pay for four outcomes:
- A stable repair that holds
- A smooth paint-ready finish
- Low-dust work habits and cleanup
- A pro assessment that spots problems early
Our field process on small hole repairs:
- Isolate the area.
- Mask off nearby surfaces.
- Check surrounding drywall for softness, moisture, and loose edges.
- Add backing behind a cutout when needed.
- Tape and build the patch.
- Smooth to paint-ready.
- Wipe down after completion to minimize dust.
Methods and materials we often use: backer board behind cutouts, mesh tape, paper tape, premix compound, corner bead repair.
What drives the final price up
Most pricing surprises come from site conditions, access, and finish scope.
- Hidden moisture
- No solid backing behind the cutout
- Gypsum that crumbles and will not hold a tight edge
- Rework after a DIY attempt
- Travel and parking fees in some areas, especially downtown Toronto
Why backing matters
A cutout flexes without support. Flex leads to cracking and visible edges after paint.
Why moisture matters
Moisture weakens drywall, slows drying, and increases failure risk.
One visit vs two visits
Most small drywall hole repairs take one visit to complete and leave the wall smooth and paint-ready.
Paint and final finishing require a second visit. Drying time drives this — joint compound must dry fully between coats before paint can be applied.
- Visit 1: Repair and smooth to paint-ready.
- Visit 2: Prime and paint.
DIY vs pro — your decision rule
DIY up to fist size if you have time and skill. Three points decide success: the repair holds with no flex, the surface ends smooth, and the edges blend after paint.
Stop DIY and call FIXRR when you hit these red flags:
- No backing behind a cutout
- Repeat cracking along a seam
- Large trade access cutout for plumbing or electrical
When plumbers or electricians open a wall, drywall repair and paint often land on the homeowner as a separate step. See our step-by-step drywall repair guide if you want to assess the job yourself first.
Case study — downtown Toronto condo
Damage: A doorknob hit the wall and left a baseball-sized hole.
What went wrong: The tenant attempted a DIY patch. The repair turned unstable — compound build-up was uneven and messy. We removed the failed work and rebuilt to a smooth paint-ready finish.
Time and cost impact: This started as a minimum charge job. The DIY rework added 4+ hours across two visits and $400 in additional cost.
Simple pricing table
Use this as a starting point. Final price depends on site conditions, access, and finish scope.
| Service | What you get | Typical price |
|---|---|---|
| Small hole repair, paint-ready, no final paint | Stable repair, smooth finish | $249 plus HST starting |
| Small hole with backing required | Backing, rebuild, smooth finish | $249 plus HST and up |
| DIY rework — remove failed compound and rebuild | Removal, rebuild, smoothing | Often adds hundreds |
| Prime and paint add-on | Requires a second visit | Priced by paint scope |
For the full price breakdown across all repair sizes, see our drywall repair cost guide.
Local context — Scarborough, East York, The Beaches, North York, GTA
- Scarborough: Active family homes, impact damage and anchor pullouts.
- The Beaches: Older homes mixed with renovations, patches after updates.
- East York: Many bungalows and semis, wiring and mounting work leads to cutouts and patches.
- North York: High condo density, unit turnover drives trade cutouts and tenant damage.
- GTA: Steady renovation activity, drywall repair finishes the job.
For patching-specific coverage across Scarborough and The Beaches, see our drywall patching Scarborough and The Beaches page.
FAQ
Why does drywall repair start at $249?
Mobilization, protection, repair steps, and cleanup take real time even on small holes. A stable repair needs backing and proper build-up when conditions demand it.
Why does paint take two visits?
Compound drying time drives the schedule. Paint needs a fully dry repair to avoid soft spots and finish issues.
Do you offer paint matching?
Yes. You supply matching paint and we apply it, or we source and match paint as an add-on by request.
Why do some patches crack weeks later?
A poor drywall patch tends to crack in weeks after completion and is often not paint-ready — smooth finishing is a skill in itself.
Do you work in downtown Toronto condos?
Yes. Travel and parking fees apply in some areas, especially downtown Toronto.
Book your drywall repair
Call FIXRR Handyman: 437 264 6010
Service area: Scarborough, The Beaches, East York, North York, Toronto, and the GTA
Workmanship warranty: 1 year
Hours: Mon to Fri 8am to 6pm, Sat 9am to 2pm, Sun closed